Search Results

The MAXX 5 Bag Top Sealer-Labeler is designed with the operator in mind. In one smooth motion, hand fed, pre-filled bags are labeled, hermetically sealed, hole punched and returned to the operator – all in less than one second. MAXX 5 Simple. Efficient. Cost Effective. The MAXX 5 Bag Top Sealer-Labeler is designed with the operator in mind. In one smooth motion, hand fed, pre-filled bags are labeled, hermetically sealed, hole punched and returned to the operator – all in less than one second. A new header label is then automatically transferred from the label box to the sealing position, signaling the machine is ready for the next cycle. The MAXX 5 replaces the manual operations of bag sealing, hand folding and stapling a header label to a bag. The MAXX 5 uses labels that require no heat seal coating while also providing an inexpensive header label for hand-filled and/or pre-filled and sealed bags made on automatic weigh scale systems. The MAXX 5 is height adjustable to accommodate a variety of operators and work station configurations. The controls are simple to operate, consisting of a main on/off switch, a heater on/off switch and a temperature control. The sealing process is activated through a touch plate located at the lower front of the machine. The MAXX 5 is built for continuous daily operation, using hardened timing cams, a brushless motor drive, machined seal jaws and a heavy duty stainless steel folding blade. This engineered machine design uses no clutch or vacuum pump to further eliminate costly maintenance items. Average production rates are 27-29 packages per minute up to 35 ppm maximum. MAXX 5 Standard Features: - Produces hermetically sealed bags - Labels require no heat seal coating - No perforation or scoring of labels is required - Accepts a wide range of label sizes - Serrated style, Teflon Coated Constant Heat Seal Bars - Watlow digital temperature control provides precise and repeatable sealing temperature - Standard round hole punch allows for convenient hanging display of product - No tools required for instant label change-over - The machine requires no compressed air - The “Soft Touch” activating plate reduces operator fatigue - Adjustable elevating feature adjusts the machine to a comfortable working height - Heavy duty stand with 4-locking casters Optional Features: - Inkjet Date Coder Material Recommendations and Specifications Below is technical data for the labels and bags that work well for food items such as wrapped and unwrapped candies, trail mixes, nuts and spices. Many other products can also use these materials and be sealed on our MAXX 5 Sealer-Labeler machine. Labels In general, printed label materials should be 80-100# Chrome Coat or Clay Coat paper stock - basically glossy magazine cover stock. Most of the time the labels are 3.5 to 4.5 mils, but some customers do have heavier labels with the thickest at 5.5 mils. No glues or adhesive coatings should be used in this process and no scoring or perforating of the label is necessary which means most local printers can quickly fulfill your order for cut labels. The MAXX 5 seals the bag and label through the basics of time, temperature and pressure, hermetically sealing the bag and laminating the label to the plastic. *Any adhesive coating will interfere with the lamination process. Bags The bag material should be cellophane or biaxially oriented polypropylene (BOPP). We have found that 164 BOPP works well for maintaining freshness with Saran on one side and Acrylic on the other. Approved Material List for Bags 164 BOPP is a 1.64 mil Biaxially Oriented Polypropylene. It has an Acrylic coating on one side and a Saran (PVdc) coating on the opposite side. The Saran adds Oxygen protection, the Acrylic adds a better sealing surface for labels and header cards. This film is also available in a 2.0 mil version. *Note - BOPP and OPP are interchangeable terms. Seal Jaws The seal jaws are solid steel, with a cartridge heater in each jaw. The temperature is sensed by a thermocouple and read by a temperature controller, assuring that the temperature will remain stable. The temperature controller will remember the last setting after you turn off the machine. Drive Motor The MAXX 5 uses a stepper motor to assure consistent speed and start/stop points. The drive is housed in the main control box and requires no service. Reinforced Hole Punch Heat sealed 5/16" diameter hole punch provides a strong, tear resistant, hanging display. Label Dispensing System The label dispensing system consists of the label hopper, vacuum cylinder and suction cups. The vacuum cylinder is driven by the main motor. The suction cups are mounted on a traveling bar, pulling the label from the hopper and then releasing them into the label chute to be delivered to the folding plate/seal jaws. "Soft Touch" Activating Plate Finger touch operation reduces operator fatigue and promotes safe machine operation. Inkjet Date Coder The optional inkjet date coder provides Alpha-Numeric print for date or lot code. The programmable controller provides a 1/8" high font. Machine Setup Parameters A temperature setting of 275-300 degrees works well, although with the thicker labels, one customer is around 350 to 360 degrees. No other machine settings are necessary. Sealing Dimensions 8” Wide x 2.25” Deep Label Sizes 3” to 8” Wide 2.5” to 6” Long Operating Height 40” – 55” Download the Belco Industrial Brochure You May Also Be Interested in These. . . 180 Conveyor Learn More 180 Conveyor Rotary Tables Learn More Rotary Tables STC - Impulse Wire Learn More STC - Impulse Wire Want More Information? MORE INFO GET A QUOTE

Designed to provide operator confidence using the highest quality components, these capable units are affordably priced for situations where your concerns include both value and budget. BM Blister Sealer Industrial Blister Sealer Designed to provide operator confidence using the highest quality components, these capable units are affordably priced for situations where your concerns include both value and budget. The BM 2020 and BM 3025 blister sealers are available in two machine sizes with sealing platens measuring 20” Wide x 20” Deep and 30” Wide x 25” Deep. Machine set up and operation is quick and easy. Set the digital Temperature Control and Seal Time for the product to be sealed. Adjust the incoming airline pressure to the proper PSI reading on the provided air gauge. To begin the packaging process, first place a blister into each seal fixture cavity. Load the product into the blister and then lay down the blister top card. The two station shuttle drawer design provides for independent and safe operation from either side of the machine. The operator pushes the seal fixture into the machine to close off the sealing chamber and initiate the sealing cycle. Belco’s BM 2020 uses a single 8” bore cylinder to lift the seal fixture into contact with the stationary heat platen to create the necessary pressure required for a perfect seal. Dual 8” bore cylinders are used on the BM 3025. After completion of the seal cycle, the operator returns the shuttle drawer back to home position where sealed product can be unloaded and the next packaging cycle can begin. For double the production output, add an operator to package the same product on each shuttle side. You can also choose to run a different product on each machine side for additional flexibility. When you need productivity, reliability and repeatable packaging, you can count on Belco model BM Blister Sealers. Available Models Optional Features: - Independent Seal Station Timer - High Pressure 10” Bore Cylinder/s - Custom Paint - Extended Height Sealing Chamber - Recessed Teflon Coated Top Tool - Teflon Coated Platen Protector - Custom Designed Seal Fixtures Standard Features: - Stationary CNC Machined Sealing Platen - Specially Designed Heater Blanket for Even Heat Transfer - Fully Enclosed Sealing Chamber - Two Station Shuttle Drawer Operation - Watlow Digital Heat Control - Digital Seal Time Control - Oiless Air System with Pressure Gauge - Recessed Controls - Welded Tubular Steel Frame - Locking Casters and Leveling Pads - 208-230 Volt, 1 Phase Power BM2020 BM3025 Download the Belco Industrial Brochure You May Also Be Interested in These. . . 180 Conveyor Learn More 180 Conveyor Rotary Tables Learn More Rotary Tables STC - Impulse Wire Learn More STC - Impulse Wire Want More Information? MORE INFO GET A QUOTE

Want to check out the newest offerings from Belco first hand? Visit us at an upcoming trade show and see the Belco Difference. We'll See You There!

When the best shrink possible is required, even for difficult shapes and sizes or for higher production speeds, this Belco shrink tunnel can provide repeatable performance at all speed ranges. ST Recirculating Recirculating Air Tunnels Customers use this style shrink tunnel where the application calls for absolute shrink quality, control of the seal edges, speed or aesthetics. Belco Shrink Tunnels are designed and built to accept a variety of wrapped products of all shapes and sizes. Loosely wrapped products enter into the tunnel and emerge as perfectly finished shrink packages suitable for any retail level outlet or store shelf. Built on an all welded tubular steel frame, these machines are available in many heat chamber sizes to meet your production output needs. These machines combine production proven components with modern control technology to monitor and regulate the temperature, air flow and time in the tunnel to create repeatable packages all shift long. Belco uses a Watlow microprocessor based temperature control with fin strip heaters to maintain precise temperatures within the heat chamber. A direct drive 1 HP blower motor produces a forced air flow which can then be adjusted and directed to the top, bottom and sides of the package as it passes through the tunnel. This forced air flow can also be patterned to contact the film wherever you select to quickly balloon the film about the product and then tightly shrink it down around the contours of the package. This produces consistent, high quality, uniformly shrink wrapped packages, even for the most difficult shapes and sizes. By having the capability of tuning the airflow pattern around your product, Belco shrink tunnels can operate at lower, more energy efficient temperatures, run at faster production rates and make less demands on your work space. For packaging speeds of 200,000 to 4 million packages per year, these Recirculating Air Style shrink tunnels are perfect complements for semi-automatic sealer, automatic L-Sealer and automatic Side Sealer production lines. Available Models ST1608 ST1608SS ST1608L ST1608LSS ST1612 ST2210 ST2210SS ST2214 ST3212 ST3216 ST4410 Standard Features: - Watlow microprocessor based digital temperature control - Heavy duty 1 HP blower motor with air flow controls - Variable speed conveyor control - Independent Heater On/Off switch - Direct drive conveyor motor - Fused electrical protection - Automatic tunnel cool down and shut-off - Heavy duty locking casters and leveling pads Optional Features: - Multiple Conveyor choices - Lighted Viewing Window - Smart Tunnel Control System - Infeed and Exit Conveyor extensions - Stainless Steel Construction - 240/480 Volt 3 Phase Power Download the Belco Industrial Brochure Go To ST Fan Tunnels Go to ST High-Speed Recirculating Tunnels You May Also Be Interested in These. . . 180 Conveyor Learn More 180 Conveyor Rotary Tables Learn More Rotary Tables ALS Learn More ALS Want More Information? MORE INFO GET A QUOTE

Belco’s Model STC Sealer-Tunnel Combinations with the Hot Knife Sealing System eliminates the traditional impulse wire used for sealing and cutting the film during the packaging process. STC Hot Knife Sealer / Tunnel Combination Belco’s STC with hot knife sealing system is an excellent value for a complete shrink packaging system with an L-Sealer and Fan Style Shrink Tunnel built onto one compact frame. This system delivers all the packaging performance you would expect from separate components. The welded construction of the seal head prevents any flexing or misalignment to the sealing base during the constant, daily use of the machine. This unique construction produces even seal pressure resulting in consistently strong seals, fast cycle times and years of trouble free performance. The Fan Style Shrink Tunnel features a micro-processor based digital temperature control, adjustable speed fan controls for top and bottom air flow and a variable speed conveyor to give you the ability to perfectly shrink your products. Multiple shift operation and years of trouble free production can be expected from these machines. Available in two popular sizes with all the standard options, these machines can easily handle production speeds up to 20 packages per minute or more depending on your package size and shape. Available Models STC2016HK STC2520HK Standard Features: - Welded Tubular Steel Frame and Sealing Head - Watlow Temperature Controls for the Front Seal and Side Seal - Mushroom Style Seal Blades with Radius Corner Cutoff - Adjustable Tilt Table/Conveyor - Watlow Digital Tunnel Temperature Control - Variable Speed Fan Controls to Regulate Tunnel Air Flow - Variable Speed Tunnel Conveyor - Lighted Viewing Window (STC 2520) - Heavy Duty Locking Casters and Leveling Pads Optional Features: - Multiple Tunnel Conveyor Choices - Magna-Lock Sealing System - Air Operated Sealing System - Product Take-Away Conveyor - Powered Film Unwind - Inverting Heads - Multi-perforator Hole Punches - Lighted Viewing Window (STC2016) - 240/480 Volt 3 Phase Power Download the Belco Industrial Brochure Want More Information on an IMPULSE WIRE machine? Click Here! You May Also Be Interested in These. . . 180 Conveyor Learn More 180 Conveyor Rotary Tables Learn More Rotary Tables ALS Learn More ALS Want More Information? MORE INFO GET A QUOTE

The Merlin is a fully automatic F/F/S wrapper designed and built on a modular frame to form and seal flat film around your product without producing any waste or trim. Four models are available and each will produce the lowest cost per package possible for film wrapping and shrink packaging needs. Introducing MERLIN When You Need The Best! The Merlin is a fully automatic F/F/S wrapper designed to form and seal flat film around your product without producing any waste or film trim. This design produces the lowest cost per package and can maintain production speeds up to 100 packages or 120 feet of film per minute depending on model and configuration. The Merlin Sealer comes with a 16” or 24” wide hot knife cross seal and your choice of a static overlap or thermal bottom seal to satisfy any film requirement. Four configurations of sealing modules are offered to best meet your specific packaging needs. How Do I Choose? The Merlin Sealer with Rotary seal head is an excellent choice for low profile packages and best suited for hi-speed operations requiring up to 100 ppm or more. It is perfect to use with most shrink films and comes with the static overlap bottom seal to create a retail level package appearance. Choose the 16” cross seal for package widths up to 14” wide and no taller than 1” high. Choose the 24” cross seal for product sizes up to 22” wide and 1” or less in height. This sealer design requires a minimum amount of maintenance due to very few moving parts and is generally chosen for dedicated product size packaging lines. The Orbital Merlin Sealer is a great choice for packages that have a wide range of cutoff lengths, are taller or grouped in similar size and height ranges and where speeds up to 80 packages per minute are needed. This sealer has a minimum of moving parts and is easy to maintain. It is available in a 16” or 24” cross seal size and comes standard with a static overlap or optional thermal bottom seal based on your film preference. The Stationary Merlin Sealer has the capability to package tall and wide products, utilize flat film for the lowest cost per package and run multiple production shifts in operations where speed is not an issue. This machine design, with its stop and start conveyor system, allows product to be fed into the sealer automatically at speeds up to 15 ppm or more depending on product length. The Reciprocating Motion Merlin Sealer can accept tall and wide products at up to 80 ppm depending on product size and length. The variable speed discharge conveyor has the ability to close the gap between products during the sealing process to minimize overall bag length and further reduce the cost per package. This servo driven sealer is a perfect choice to achieve the lowest overall cost per package compared with other packaging methods including automatic L-sealers and side sealers. Merlin: Rotary Standard Features: - 16” Wide Rotary Hot Knife Sealing System - Digital Temperature Control - Hand wheel adjustable controls for simple product change over - Package speeds up to 100 packages per minute - Vacuum Belt Transfer Conveyor - 3-1/2’ Flighted infeed conveyor - Fixed Height Film Former - Multi-Perforator Hole Punch - Heavy Duty Welded Tubular Steel Frame - Heavy duty locking casters and leveling pads - No Product/No Cycle Photo-Eye - No Air required - 120 Volt, 20 Amp, power requirement - Static Bottom Overlap Seal Optional Features: - 8’ or 12’ Flighted Infeed Conveyor Module with Paper Guides (Replaces 3-1/2’ Module) - Product Management Devices - Adjustable Height Film Former - Thermal Bottom Seal - Belted and Low Pressure Accumulation Infeed Modules - Reverse Flow Operation - Custom Integration Download the Belco Industrial Brochure You May Also Be Interested in These. . . 180 Conveyor Learn More 180 Conveyor Rotary Tables Learn More Rotary Tables ST-HS Recirculating Learn More ST-HS Recirculating Want More Information? MORE INFO GET A QUOTE

Increased production rates only mean greater productivity if superior quality control is achieved. Belco Medical Tray Sealers utilize proven components that assure you of the highest levels of process control at even the closest tolerances. 60 Years of Service BELCO MEDICAL PACKAGING When Quality Matters Belco Medical Tray Sealers BM EL Belco's EL Series of Medical Tray Sealers offer great flexibility by providing independent seal time controls for front and rear shuttles. Temperature and Pressure seal parameter settings can be visually confirmed by viewing the convenient eye level mounted digital displays, providing a higher level of process control. Each operator may seal different packages, such as an inner and outer tray, for increased productivity. Learn More BM PLC Enhance your process control, packaging flexibility and productivity with this advanced model. Offering independent pressure and seal time settings for each shuttle side increases production flexibility. The PLC program features precise Time, Temperature, and seal Pressure control. Process Alarms provide increased confidence in your package seal quality. The BM PLC models also offer security password protection. Learn More BM PC Designed to insure the highest level of consistency and repeatability, Belco’s BM PC controlled and monitored sealers are precision packaging systems designed to produce repeatable, high quality seals for an FDA monitored environment. The open PC architecture provides for real time Package Data Acquisition, monitoring of every cycle for process alarms, reports both machine level and cycle level errors and LAN capability. Learn More Belco Medical Pouch Sealers PM Medical PM EL - Table Top Design - For Invasive or Implantable Device Packaging - Stainless Steel Panels - Eye Level Digital Controls - Multi-Temperature Monitoring of the Seal Bar - Verification Ports for: - Time - Temperature - Pressure PM PLC Adds the following: - PLC Operation - For Packaging Implantable or Invasive Devices - Seal Pressure Verification Program - System Alarms for Multiple Functions - Color Touch Screen Operator Interface - Process Alarm for Temperature & Pressure More Info PM PC Medical PM PC - 7" Beckhoff touch screen, dual core panel mounted HMI terminal for input of time, temperature, and pressure parameters - Verification ports for time, temperature, and pressure - Data Acquisition Functionality - Dual thermocouple for control and monitoring - Temperature control optimized from 200 to 300 degrees Fahrenheit - 3/8” wide Seal Bar - Parallel bag stop and automatic seal cycle activation upon bag presentation - Adjustable pouch centering guide - Bottom Heated Seal Pad (optional) - Pouch seal depth adjustable from .5” to 2.5” More Info PM EL The Belco Model PM EL Pouch Sealer is a table top machine featuring all digital controls and is used for manually heat sealing your medical device into a premade Tyvek/Mylar or foil pouch. Available in two sizes to best accommodate your widest pouch, choose either the 18" or 24" constant heat model. Learn More PM PLC The Belco Model PM PLC Pouch Sealer is a table top machine featuring PLC operation and a color touch screen to manually heat seal your medical device into a premade Tyvek/Mylar or foil pouch. Available in two sizes to best accommodate your widest pouch, choose either the 18" or 24" constant heat model. Learn More PM PC The Belco Model PM PC Sealer was specifically developed to heat seal premade Tyvek/Mylar or foil pouches in a clean room environment. These constant-heat, table top sealing machines are available in both an 18” and 24” size to best accommodate your widest pouch. Learn More Belco Seal Fixtures & Test Tools SEAL FIXTURES Belco seal fixtures are custom engineered and machined as precision tools. They are used to heat seal your thermoformed trays and Tyvek or foil lid stock to produce a perfectly sealed package. Learn More VERIFICATION TEST TOOLS Belco Verification Test Tools allow for the convenience of on-demand user verification of controls used on Belco BM Tray Sealers and PM Pouch Sealers. VTP Test Tool The Belco VTP Pressure Verification Tool is a calibrated pressure test gauge. VTT Test Tool The Belco VTT Time Verification Tool is a calibrated test timer. Learn More Download the Belco Medical Sealer Brochure How to choose which Belco Medical Tray Sealer is right for you? When considering which model Belco Medical Tray Sealer to choose, there are two issues of primary consideration: Sealing Size and Required Levels of Process Control. Sealing Size The first consideration is the size range of your package components. Do your trays and lids fit within the maximum sealing area for each respective machine size? Other factors may affect and influence your desired results, such as total seal surface area, sealing flange width, thermoform material thickness and consistency. For more specific information, please consult with Belco's experienced and knowledgeable medical sales group. Required Levels of Process Control As you step up in performance with each model, you gain an increased level of control and flexibility. The BM PC models add sophisticated levels of data acquisition. No matter which series you choose, ALL Belco models are capable of delivering the same high quality sealed package. Total Efficiency. . . No Ifs, Ands or Bolts You'll profit from the solid advantages of Belco Medical Tray and Pouch Sealers. These ruggedly-built machines provide the framework for greater productivity and less maintenance, which means higher productivity for you. Year after year, Belco's durable, heavy-duty, fully-welded tubular steel frames give you dependable performance and consistent results ... and that's crucial in the medical packaging industry. Belco Medical Tray and Pouch Sealers, reinforced at all pressure points, are built to last. No bolts to loosen and weaken the machine. No shaking and rattling to affect production performance or accuracy. No machine components failing or jamming in critical situations. What you get are total performance medical tray sealers that are simple to operate and easy to maintain.

Performs scheduled and on-demand procurement services in support of all fabrication, manufacturing, facility and maintenance departments. Maintains strict documentation control within ERP system and hard copy purchase orders of all procured materials, services and issued contractual agreements, RFQ’s, written correspondence including emails, memo’s and support documents. NOW HIRING Purchasing Agent Job Position/Title: Purchasing Agent Reports to: Operations Manager Status: Non-Exempt Position Overview Performs scheduled and on-demand procurement services in support of all fabrication, manufacturing, facility and maintenance departments. Maintains strict documentation control within ERP system and hard copy purchase orders of all procured materials, services and issued contractual agreements, RFQ’s, written correspondence including emails, memo’s and support documents. General outline of position tasks: Position responsibilities include daily purchasing requisition review, issuance of new purchase orders or material release, open order follow-up, validating on-hand inventory as required, perform new vendor/services survey for the purpose of expanding vendor/service base, timely processing of all related procurement, effective management of all procured items for accurate document control of purchase order status and accounting documentation when required. Daily assignment duties: Review all email, faxed and individually submitted inquiries, voicemail messages and general communications Provide timely communication replies via email, fax or by direct communication (phone or in-person) on all daily and scheduled inquiries and projects or tasks Review assigned material requisitions & releases, generate purchase orders, generate supportive RFQ’s or issue material release requests Present Operations Manager at the end of each day all Purchase Orders issued same day for review Attend all scheduled meetings as scheduled or as required Maintain & provide Project & Task List via email to Operations Manager Maintain and organize all hard copy records, document filing system, pending RFQ’s in neat, organized manner for ease of access by management Maintain office /work center in clean & organized manner Procurement Responsibilities PA to create purchase orders and include support documentation, pictures, specification sheets, current drawings including product samples (if required) for the purpose of vendor fabrication and quality control as well as historical documentation PA has direct responsibility to coordinate all components procured which include expediting/open order status, vendor communication & support documentation, maintenance and accuracy of all open purchase orders, delivery information & changes that will affect on time product availability PA will seek best in service, support and pricing for all related materials and service purchases, which includes a minimum of three RFQ’s for new or selected material & fabricated components RFQ’s will be presented on a cost and services comparison sheet when using multiple vendors PA will challenge all price increases, requesting reason for increase (documentation may be required) and submit to Operations Manager or Executive Management for approval unless otherwise instructed PA will follow First Article approval process for all newly sourced or redeveloped components, assemblies and products, this includes accurate documentation and coordination with designated QC personnel or management as assigned PA will coordinate inbound transportation services with shipping coordinator, including providing support documentation for receiving and inspection purposes PA will maintain Proforma status (payments, deposits) on all assigned orders, copies for reference attached to each PO, coordinate accounting requirements with Accounting AP personnel PA will work closely with accounting to maintain accurate records on payment status, credits and debits for all purchased materials PA will review MRR (material rejection report) log weekly, address all product returns, rework charge-backs PA will provide supportive role for Stockroom & Inventory Control personnel PA will take active role with stockroom, inspection personnel & receiving personnel when requested PA will take part in weekly materials meetings and provide requested status of materials and components on demand Communication Skill Requirements Individual to develop a positive, collaborative and supportive working atmosphere with peers, suppliers and company personnel PA will be required to maintain accurate communication records, which will include faxes, email history, support documentation, drawings as well as samples, photo documentation PA must be able to effectively communicate requirements, status, issues and recommendations with suppliers, internal support personnel and management both orally and in written form PA must be able generate RFQ packages which clearly outline material and company requirements, reply back on RFQ status to all submitting suppliers PA will maintain strict confidentiality regarding all business strategies, costs, program and product development as well as financial and personnel information PA will maintain a professional and positive working demeanor with all clients, support suppliers and internal personnel Supplier Source Development PA will have the ability to seek and source new service suppliers for specific products, services and supply PA will use the purchasing survey, terms and conditions program outline and company supported literature as well as material and product sampling and other company approved materials for source development PA will coordinate and share all related new source information with Operations Manager prior to establishing a business relationship or engaging in to any contractual or agreement obligations PA to follow SOP for creating new supplier in QuickBooks PA must be able to perform on-site vendor source survey or seek suitable internal support personnel to assist in this activity PA will report all offered incentives and/or gifts presented by outside service suppliers or vendors directly to the Operations Manager, applies to all new as well as existing suppliers Additional duties - when required or assigned Assisting Accounting on monthly product and component costing Assisting Accounting on vendor credit & debit accountability Assisting Shipping on transportation service(s) development and international brokerage requirements (as required) Assisting Engineering on component, assembly and material specifications Maintaining accurate and current vendor contact information in QuickBooks Maintaining accurate costs, OEM specifications and support information in QuickBooks Assisting Accounting & Engineering in QuickBooks data management entry Local vendor source travel may be required Project Assignment Train Junior Buyer to manage Operation Supply ordering and maintenance & maintenance of MSDS/Component Certification and to coordinate tool calibration schedule & documentation Qualifications: Required purchasing experience minimum of five years, preferably in a job shop environment Educational requirements two year degree or minimum college class participation equivalent of two years Have solid math skills, including percentages Experience performing daily data entry, 10 key Possess excellent communication skills, written & orally Must possess intermediate Microsoft Office ability, including Excel, Word Must be able to work independently with minimal supervision Must possess valid California driver's license, no violations within last 3 years Safety conscious at all times, conforms to the Belco safety requirements and regulations Physical Requirements: Position will require individual to sit at desk for prolonged periods and perform daily data entry and communication support duties Position will require individual to stand for prolonged periods of time when conducting inventory materials review in stockroom, work in process on manufacturing floor and raw materials/operation supply storage areas Position will require individual be able to navigate (walk) facility upstairs and downstairs with minimal physical effort Job description duties and requirements subject to change Apply Now! HR@BelcoPackaging.com